Search results

Purpose – This paper aims to detect or identify the presence of hydrocarbon infiltration on sampling point in the Rambe River area according to the obtained VOCs and the adsorbed SVOCs.

Design/Methodology/Approach – The Gore-sorber method has been used to capture volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) as indicators of subsurface hydrocarbon generation and entrapment. This method is usually used in environmental surveys for the oil investigations in certain areas for surface survey screening, designed to collect a broad range of VOCs and (SVOCs) at lower concentrations, quickly and inexpensively. The results also indicated a general correlation between the GORE-SORBER and reference method data. The research was conducted in Rambe River Village, Tebing Tinggi sub-district of Tanjung Jabung Barat district, Jambi Province Indonesia. The collection of the Gore-Sorber modules were analyzed using a gas chromatography-mass spectrometer thermal desorption (GC/MS).

Findings – The results showed that from all sampling points in Tebing Tinggi areas, the dominant components detected are carbonyl sulphide, dimethyl sulfide, ethane, propane, butane, 2-methyl butane, pentane, and carbon sulfide with carbon chain in the range C2-C5. These hydrocarbon gases (C1-C4) which may be from thermogenic or microbial processes. The highest concentrations of carbonyl sulfide were 392.67 ng and dimethyl disulfide 261.90 ng.

Originality/Value – In addition to estimate and predict the petroleum formation, this article provides information about the presence of oil fields in the area of the Sungai Rambe Village

Purpose – This work aims to study the treatment of adsorbant on the increasing liquid hydrocarbon quality produced by pyrolysis low density polyethylene (LDPE) plastic waste at low temperature. The hydrocarbon distribution, physicochemical properties and emission test were also studied due to its application in internal combustion engine. This research uses pure Calcium carbonate (CaCO₃) and pure activated carbon as adsorbant, LDPE type clear plastic samples with control variable that is solar gas station.

Design/Methodology/Approach – LDPE plastic waste of 10 kg were vaporized in the thermal cracking batch reactor using LPG 12 kg as fuel at range temperature from 100 to 300°C and condensed into liquid hydrocarbon. Furthermore, this product was treated with the mixed CaCO₃ and activated carbon as adsorbants to decrease contaminant material.

Findings – GC-MS identified the presence of carbon chain in the range of C6–C44 with 24.24% of hydrocarbon compounds in the liquid. They are similar to diesel (C6–C14). The 30% of liquid yields were found at operating temperature of 300°C. The calorific value of liquid was 46.021 MJ/Kg. This value was 5.07% higher than diesel as control.

Originality/Value – Hydrocarbon compounds in liquid produced by thermal cracking at a low temperature was similar to liquid from a catalytic process.